Alpine IVA-D800R Owner's Manual page 93

Connecting iPhone/Video compatible iPod and Back-up Camera
NORM EQ/DIV
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switch in the
NORM position.
Change both switches to the left to set to the NORM
position.
Change both switches to the right to set to the EQ/DIV
position.
(If the front panel is viewed from the front.)
• Do not make the two switches to different settings.
• Be sure to turn the power off to the unit before changing the switch
position.
Direct CAMERA Input Connector
Use when the optional rearview camera (such as
HCE-C107D, etc.) is connected.
• Set "Direct" in "Setting the Rear Camera Input" (page 46) when
connecting a rearview camera with Direct Output connector such as
HCE-C107D.
Camera extension cable (Included with HCE-C107D)
USB Connector
lock case
(Yellow)
• Set "AUX" in "Setting the Rear Camera Input" (page 46) when
* The optional accessory KCU-451iV contains
Rear camera
(Sold Separately)
HCE-C107D
iPhone/Video compatible
iPod (Sold Separately)
To Video Output terminal
Back-up camera
(Sold Separately)
USB extension cable (Included)
*
USB 30P cable (Sold Separately)
*
AV extension cable (Sold Separately)
AV Connector
Video Input/Camera Input RCA Connector (AUX/
CAMERA IN) (Yellow)
Input the AUX video or use when connecting a rearview
camera with RCA Output connector.
connecting a rearview camera with RCA Output connector.
RCA Extension Cable (Sold Separately)
individually purchase or .
and , you cannot
93
-EN