Answering A Call; Hanging Up The Telephone; Adjusting The Volume When Receiving A Call; Redial Function - Alpine IVA-D800R Owner's Manual

Answering a Call

Incoming calls are announced by the received call ring tone and a
displayed message (Caller name/PHONE No.).
Touch [ ].
The call starts.
• Indicator (Signal Strength):
While calling, the indicator will display the current signal strength of
mobile phone. While in the mode other than Calling, the unit cannot
read the signal strength of the mobile phone exactly. In this case, the
indicator displays the signal strength of last call.
• When "Setting the Received Calls automatically (Auto Answer)"
(page 62) is set to ON, you can receive a call automatically.
• While calling, the source sound on the unit is muted.
After calling, playback will resume.

Hanging up the Telephone

Touch [ ].
The call finishes.
Adjusting the volume when receiving a
Call
While calling, you can adjust the volume. The adjusted volume level is
stored.
Turn the Rotary encoder to adjust the volume.
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result
in feedback. If feedback is noticed as feedback is directly related to
the volume, turn down the volume as low as acceptable to eliminate
it. Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.

Redial Function

You can redial the person you have previously called.
After finishing a call, touch [
5 seconds.
The telephone is redialed.
] on the screen within

Call Switching Operation

While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
While calling, touch [
between the unit and mobile phone.
• Depending on the mobile phone, this operation may not be
performed.

Call History

Call History is recorded for the last dialed/received/missed calls. There
are various ways of making calls based on the "Call History". The
following steps 1 to 3 are common to the various ways of making these
calls. For details, refer to each individual category for making calls.
1
Check that "Adapter" is selected in "Setting the
BLUETOOTH Connection (BLUETOOTH IN)"
(page 48).
2
Press SOURCE/ .
The SOURCE selection screen is displayed.
3
Touch [Phone].
The Telephone Menu screen is displayed.
4
Touch the title bar of the desired item to place the
call.
Setting items:
Dialed Calls / Received Calls / Missed Calls / Phone Book /
Dial Input / Voice Dial
• The adapter will update the information in the Call History
automatically each time a mobile phone is connected or receiving/
dialing a call. At this time, if you select any outgoing mode, "Now
Updating" will be displayed.
• It may take some time for the list to be displayed, and also directly
after connection, the list may not be brought up to date.
5
Touch [ ] to return to the previous screen.
Touch [ Exit ] to return to the main source screen that was
displayed before the setup operation was started.
• If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.
] to switch the call sound
63
-EN