Cd/Mp3/Wma/Aac; Playback; Repeat Play - Alpine IVA-D800R Owner's Manual

CD/MP3/WMA/AAC

Display example for MP3/WMA/AAC main screen
[Source] button: Refer to page 15
[ ] button: Refer to page 33
CD:
Displays the Track text*
• If there is neither Track nor Disc name information, "NO TEXT" will
be displayed.
MP3/WMA/AAC:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name in the lower line, the album
name/artist name are displayed if there is ID3 tag
information.
CD:
Displays play state/the disc number*
progress bar/elapsed time/remain time.
MP3/WMA/AAC:
Displays play state/the disc number*
number/progress bar/elapsed playback time/remain time.
1
* Displayed when a CD text disc is inserted.
2
* Displayed when a CD changer is connected.
3
* Displayed when an MP3 compatible CD changer is connected.
• When the CD/MP3 changer source is selected, progress bar, etc. will
not be displayed.

Playback

1
Touch [Source] on the main source screen.
The SOURCE selection screen is displayed.
2
Touch [Disc].
The display shows the Disc screen.
When a CD/MP3/WMA/AAC is inserted into the DISC SLOT
of the IVA-D800R, with the label side facing up, the unit
starts to play the CD/MP3/WMA/AAC.
3
Touch [ ] or [
(file).
Returning to the beginning of the current track (file) :
Touch [ ].
Fast reverse :
Touch and hold [ ].
Advancing to the beginning of the next track (file) :
Touch [ ].
20
-EN
1 1
/Disc text* .
2
/track number/
3
/folder number/track
] to select the desired track
Fast forward :
Touch and hold [ ].
To pause playback
Touch [ / ].
Touching [ / ] again will resume playback.
To eject the disc
Press .
• If the disc does not eject, press and hold
• The IVA-D800R models include a built-in MP3/WMA/AAC unit. You
can play CD-ROMs, CD-Rs, and CD-RWs containing MP3/WMA/
AAC files on this unit. Use the format compliant with this unit.
For further information about playing or storing MP3/WMA/AAC
files, refer to pages 21 and 22 before using the unit.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The unit can play discs containing both audio data and MP3/WMA/
AAC data.
• The track display for CD audio data playback is the track numbers
recorded on the disc.
• Three-inch (8cm) CD's can be used.
• "Playing MP3/WMA/AAC Data (File Play Mode)" is mentioned on
page 40.
• If an MP3/WMA/AAC disc with many files and folders is played, it
takes a little longer than normal to start playback.
• Touch [ ] to activate the search mode. For operations, refer to
"Search Function" on page 33.
However, the search mode function does not work in the CD changer
mode.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• If the disc is left in the unit after pressing
automatically pulled back into the unit and paused. In this case, start
playback by touching [ /
within 15 seconds.

Repeat Play

Touch [ ] to play back repeatedly the track currently
being played.
The track (file) will be played repeatedly.
Touch [ ] again and select OFF to deactivate Repeat play.
1
CD: *
(Repeat one) (Repeat disc)
MP3/WMA/AAC:
3
1 Touch [P1/2]* to change the function guide.
2 Touch [ ] and select the desired Repeat play.
2
*
(Repeat one) (Repeat folder)
1
* If a CD Changer or an MP3 compatible CD changer is connected
and the RPT DISC mode is selected, the unit repeatedly plays back
all tracks (files) on the disc selected.
2
* Only files in a folder are repeatedly played back.
3
* Display may vary depending on the connected devices.
for at least 3 seconds.
, the disc is
] or eject again and remove the disc
(off)
1
(off)
*
(Repeat disc)