Repairing Or Replacing A 16850 Series Logic Analyzer; C A U T I O N; Electrostatic Discharge Can Damage Electronic Components. Use - Agilent Technologies 16850 Series Service Manual

Agilent 16850 Series Logic Analyzer
Service Guide
6
Repairing or Replacing a 16850 Series
Logic Analyzer
To remove the logic analyzer cable
To return the 16850 Logic Analyzer or Cable for Repair/Exchange
If the 16850 series logic analyzer or any of its parts are
faulty, return it to Agilent Technologies for
repair/replacement. Agilent requires that the 16850 logic
analyzer unit be repaired only at qualified repair facilities
such as the Agilent Repair Centers.

Electrostatic discharge can damage electronic components. Use

C A U T I O N

grounded wriststraps and mats when performing any service to this
instrument.
Hazardous voltages exist on the power supply. To avoid electrical shock,
WA R N I N G
disconnect power from the instrument before performing the following
procedures. After disconnecting the power, wait at least six minutes for
the capacitors on the power supply board to discharge before servicing the
instrument.
Damage can occur to electronic components if you remove or components
C A U T I O N
when the instrument is on or when the power cable is connected. Turn off
the 16850 logic analyzer before performing the following procedures.
84
Agilent Technologies
85
83