NEC Express 5800 User Manual page 14

Table 1-1 lists the typical system rack components shown in Figure 1-1.
Item Component
A Monitor (LCD)
B Monitor Tray
C Keyboard and Mouse
D Keyboard and Mouse Tray
E 8-Port Concentrator
F Express5800 Server
G Disk Expansion Unit
H Power Distribution Unit (not
shown)
High-performance,
line-interactive, Uninterruptible
Power Source (UPS)
1-4 Introduction
Table 1-1. Typical System Rack Components
Description
A monitor that serves as your standard output device.
Supports your monitor when installed in the rack.
Standard input devices.
Supports your keyboard and mouse when installed in the
rack.
Allows you to connect a single keyboard, mouse, and
monitor to up to eight servers
Contains the Central Processing Unit (CPU), memory,
disks, and other support hardware.
Supports RAID configuration as well as disk expansion.
If you are not using an Uninterruptible Power Source
(UPS), AC power is distributed to system components
through a Power Distribution Unit (PDU).
Provides clean, reliable AC power to rack components to
protect them from power blackouts, brownouts, swells,
sags, surges, and interference
the UPS can be used together with APC™ PowerChute
plus software to automate power protection services to
up to three Servers.
®