Power Fail Led; Overheat/Fan Fail/Uid Led; Nic2 (Activity) Led; Nic1 (Activity) Led - Supero H8DCL-i User Manual

H8DCL-6/i(F) SERVERBOARD USER'S MANUAL

Power Fail LED

The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer to
the table on the right for pin defi nitions.

Overheat/Fan Fail/UID LED

Connect an LED to the OH connection
on pins 7 and 8 of JF1 to provide
a d v a n c e d w a r n i n g o f c h a s s i s
overheating or fan failure. Refer to the
table on the right for pin defi nitions and
status indicators.

NIC2 (Activity) LED

The LED connections for LAN2 are on
pins 9 and 10 of JF1. Attach LAN LED
cables to display network activity. See
the table on the right for pin defi nitions.

NIC1 (Activity) LED

The LED connections for LAN1 are on
pins 11 and 12 of JF1. Attach LAN LED
cables to display network activity. See
the table on the right for pin defi nitions.

HDD LED

The HDD LED connection is located
on pins 13 and 14 of JF1. Attach the
hard drive LED cable here to display
disk activity (for any hard drives on the
system, including SAS, Serial ATA and
IDE). See the table on the right for pin
defi nitions
PWR Fail LED
Pin Defi nitions
Pin# Defi nition
5
6
OH/Fan Fail LED
Pin Defi nitions
Pin# Defi nition
7
8
OH/Fan Fail
State
Solid
Blinking
Pin Defi nitions
Pin# Defi nition
9
10
Pin Defi nitions
Pin# Defi nition
11
12
Pin Defi nitions
Pin# Defi nition
13
14
2-10
(JF1)
3.3V
Power Fail LED
(JF1)
Vcc
OH/Fan Fail
(Red)/UID (Blue)
LED
LED Status
Indication
Overheat
Fan fail
NIC2 LED
(JF1)
Vcc
Activity
NIC1 LED
(JF1)
Vcc
Activity
HDD LED
(JF1)
Vcc
HDD LED