P-Pre Select Screen - Ikegami MLW-2425C Instruction Manual

5.11 P-Pre Select Screen

This is a function used for making the double-screen setting. It is necessary that Input
Control setting should be made on the Memory Select Screen in advance as described under
section 5.10.
Display screen
P-Pre select screen description
• Preset No:
• Active:
• IN1 Select:
• IN2 Select:
• PinP Select:
• PinP Position: Used to set the Sub screen display positions for PINP1/PINP2.
Used to specify the Preset Number for double-screen setting. Four
different types are available for setting.
Specifies a Preset Number to be Active or Inactive.
If it is set to OFF, the double-screen display of that Preset Number
is deactivated.
Specifies the input to be displayed on the Main screen.
The items that can be selected are those are selected for IN1 on
Memory Select Screen - Input Control (indicated by " " symbol) as
described under section 5.10.
If " "symbol is displayed, there is no selectable input available.
Specifies the input to be displayed on the Sub screen.
The items that can be selected are those are selected for IN2 on
Memory Select Screen - Input Control (indicated by " " symbol) as
described under section 5.10.
If " "symbol is displayed, there is no selectable input available.
Used to set the double-screen display state:
PinP1: Smaller Sub screen display
PinP2: Larger Sub screen display
SBS1: Reduced full-size display
SBS2: Dot-by-dot display
1: Upper left position of the screen
2: Upper right position of the screen
3: Lower left position of the screen
4: Lower right position of the screen
19
5. Operation