Electromagnetic Compatibility And Rf Exposure; Preliminary Inspection - Vertex Standard VX-1700 Operating Manual

I
NSTALLATION
Electromagnetic Compatibility
If this transceiver is used with or in the vicinity of a com-
puter or computer-driven accessories, you may need to
experiment with grounding and/or radio frequency inter-
ference (RFI) suppression devices (such as ferrite cores)
to minimize interference to your communications caused
by energy leakage from the computer.
Although there is negligible radio frequency (RF) leakage
from the VX-1700 transceiver itself, its antenna system
should be located as far away from humans and animals as
practicable, so as to avoid the possibility of shock due to
accidental contact with the antenna or excessive long-term
exposure to RF energy.
Page 6
and RF Exposure

Preliminary Inspection

Inspect the transceiver visually immediately upon open-
ing the packing carton. Confirm that all controls and
switches work freely, and inspect the cabinet for any dam-
age. Gently shake the transceiver to verify that no internal
components have been shaken loose due to rough han-
dling during shipping.
If any evidence of damage is discovered, document it thor-
oughly and contact the shipping company (or your local
dealer, if the unit was purchased over-the-counter) so as to
get instructions regarding the prompt resolution of the
damage situation. Be certain to save the shipping carton,
especially if there are any punctures or other evidence of
damage incurred during shipping; if it is necessary to re-
turn the unit for service or replacement, use the original
packing materials but put the entire package inside an-
other packing carton, so as to preserve the evidence of
shipping damage for insurance purposes.
VX-1700 O M