Vertex Standard VX-1700 Series Service Manual
  1. Manuals
  2. Brands
  3. Vertex Standard Manuals
  4. Radio
  5. VX-1700 Series
  6. Service manual

Vertex Standard VX-1700 Series Service Manual

Hf multi mode mobile radio
Hide thumbs Also See for VX-1700 Series:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Reference Book
VX-1700 Series
HF Multi Mode Mobile Radio
Service Manual
For USA Version
©2005 VERTEX STANDARD CO., LTD.
Introduction
This manual provides the technical information necessary for servicing the VX-1700 HF Transceiver.
Servicing this equipment requires expertise in handing surface-mount chip components. Attempts by non-
qualified persons to service this equipment may result in permanent damage not covered by the warranty,
and may be illegal in some countries.
Two PCB layout diagrams are provided for each double-sided board in this transceiver. Each side of the board
is referred to by the type of the majority of components installed on that side ("Side A" or "Side B"). In most
cases one side has only chip components (surface-mount devices), and the other has either a mixture of both
chip and leaded components (trimmers, coils, electrolytic capacitors, ICs, etc.), or leaded components only.
As described in the pages to follow, the advanced microprocessor design of the VX-1700 Transceiver allows a
complete alignment of this transceiver to be performed without opening the case of the radio; all adjustments
can be performed from the front panel, using the "Alignment Mode" menu.
While we believe the information in this manual to be correct, VERTEX STANDARD assumes no liability for
damage that may occur as a result of typographical or other errors that may be present. Your cooperation in
pointing out any inconsistencies in the technical information would be appreciated.
Specifications ...................................................................................................................................................... 2
Exploded View & Miscellaneous Parts .......................................................................................................... 3
Block Diagram .................................................................................................................................................... 5
Connection Diagram .......................................................................................................................................... 6
Circuit Description ............................................................................................................................................. 7
Connector Pinout Diagrams ........................................................................................................................... 10
Alignment .......................................................................................................................................................... 11
ALE-1 Automatic Link Establishment Unit Installation .......................................................................... 19
CE77 PC Programming Software ................................................................................................................... 21
Board Units (Schematics, Layouts & Parts)
MAIN Unit .................................................................................................................................................. 49
PA Unit ........................................................................................................................................................ 71
PANEL Unit ................................................................................................................................................ 81
GPS-INTERFACE Unit .............................................................................................................................. 87
MIC Unit ...................................................................................................................................................... 91
ENC Unit ..................................................................................................................................................... 92
ALE Unit (Option) ..................................................................................................................................... 93
EC051H95A
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
1

Advertisement

Table of Contents
loading

Related Manuals for Vertex Standard VX-1700 Series

Summary of Contents for Vertex Standard VX-1700 Series

  • Page 1: Table Of Contents

    “Alignment Mode” menu. While we believe the information in this manual to be correct, VERTEX STANDARD assumes no liability for damage that may occur as a result of typographical or other errors that may be present. Your cooperation in pointing out any inconsistencies in the technical information would be appreciated.

  • Page 2: Specifications

    Specifications General Receiver Frequency Range: 30 kHz ~ 30.0000 MHz Transmitter Frequency: 1.600 ~ 30.0000 MHz Emission Modes: A1A (CW), J3E (LSB/USB), A3E (AM), J2B (USB/LSB), Frequency Synthesizer Step: 10 Hz, 100 Hz, 1 kHz Frequency Stability: ±1 ppm (Typical) Operating Temperature Range: 14°...

  • Page 3: Exploded View & Miscellaneous Parts

    Exploded View & Miscellaneous Parts RA0695200 COVER (TOP) PA UNIT P1090352 CONNECTOR (FM-MDR-MI) RA0695600 RA0635400 HOLDER PLATE (CW) CHASSIS T9207202A WIRE ASSY PANEL UNIT RA0695700 HOLDER PLATE (D-SUB) RA0696100 REFLECTOR SHEET RA0727200 DIFFUSER SHEET (BLIND) (2pcs) RA0695800 INTER CONNECTOR (2pcs) G6090162 MAIN UNIT RA0695000...
  • Page 4 Exploded View & Miscellaneous Parts...

  • Page 5: Block Diagram

    Block Diagram...

  • Page 6: Connection Diagram

    Connection Diagram...

  • Page 7: Circuit Description

    Circuit Description Receive Signal Path The DSP IC Q1035 (UPD77115) outputs AGC data which is proportionate to the received signal Incoming RF signal from the ANT jack is delivered strength to the main CPU Q1018 (HD64F2134). The to the PA Unit, and passes through the TX/RX relay main CPU Q1018 (HD64F2134), in turn, outputs a RL2009 to J2006.

  • Page 8: Pll Circuit

    Circuit Description On the PA Unit, the low-level RF signal from the IC Q1056 (ADF4001BRU), which contains a refer- MAIN Unit is amplified by pre-driver Q2001 ence divider, serial-to-parallel data latch, program- (RD06HHF1), push-pull driver Q2008/Q2009 (both mable divider, phase comparator and a swallow RD16HHF1), and push-pull final amplifier Q2012/ counter.
  • Page 9 Circuit Description Control Circuit TX/RX Control Major frequency control functions such as channel When the PTT switch is pressed, pin 21 of the main CPU Q1018 (HD64F2134) goes low, which causes selection, display, and PLL divider control are per- formed by main CPU Q1018 (HD64F2134) on the pin 60 of the main CPU Q1018 (HD64F2134) to go MAIN Unit, at the command of the user via the tun- low.

  • Page 10: Connector Pinout Diagrams

    Connector Pinout Diagrams MIC Jack GPS Jack ( As Viewed From Front Panel ) ( As Viewed From Rear Panel ) P ENB Connected with , and CNTL GND GPS Data Input ( + ) Connected with , and MIC GND GPS Data Input ( -- ) + 5V Connected with...

  • Page 11: Alignment

    ANT jack in all procedures alignment are not covered by the warranty policy. that call for transmission, except where specified Also, Vertex Standard reserves the right to change otherwise. Correct alignment is not possible with circuits and alignment procedures in the interest of an antenna.

  • Page 12: Pll Alignment

    Alignment Reference & Local Alignment Whenever possible, alignments should be made with oscillator shields and circuit boards firmly affixed PLL R EFERENCE REQUENCY LIGNMENT in place. Also, the test equipment must be thorough- Connect the Frequency Counter to pin 4 of Q1062 ly warmed up before beginning.

  • Page 13: Transmitter Alignment

    Alignment Transmitter Alignment Receiver Alignment TX IF C RX IF C OILS LIGNMENT OILS LIGNMENT Connect the 50 Ohm Dummy Load to the ANT Connect the RF Signal Generator to the ANT jack, jack. and connect the AF millivoltmeter to the EXT SP Remove the coaxial plug from J1002 on the MAIN jack.
  • Page 14 Alignment PA Unit Alignment RIVER ECTION DLING URRENT LIGNMENT Connect the 50 Ohm Dummy Load to the ANT RIVER ECTION DLING URRENT LIGNMENT jack. Connect the 50 Ohm Dummy Load to the ANT Remove the shorting-plug from J2004 on the PA jack.
  • Page 15 Alignment CM C INAL ECTION DLING URRENT LIGNMENT OUPLER ALANCE Connect the 50 Ohm Dummy Load to the ANT Connect the 50 Ohm Dummy Load and Inline jack. Wattmeter to the ANT jack, and connect the CW Remove the solder jumper which is connected keyer to the KEY jack.
  • Page 16 Alignment Software Menu Alignment TX O UTPUT OWER LIGNMENT Connect the 50 Ohm Dummy Load and Inline The ANT jack should be connected to a Dummy Wattmeter to the ANT jack. Load (in the case of transmission) or RF Signal Gen- Referring to the Table below, press the [ ] / [ ] erator (in the case of reception).
  • Page 17 Alignment REV ALC A TX G LIGNMENT LIGNMENT Connect the 150 Ohm Dummy Load (or three 50 Connect the 50 Ohm Dummy Load and Inline Ohm Dummy Loads in parallel) to the ANT jack. Wattmeter to the ANT jack. Referring to the Table below, press the [ ] / [ ] Connect the AF Generator to pin 4 of the MIC key to recall each parameter listed, then key the jack, and adjust the AF Generator output level...
  • Page 18 Alignment Note...

  • Page 19: Ale-1 Automatic Link Establishment Unit Installation

    ALE-1 Automatic Link Establishment Unit Installation Installation Make sure that the transceiver off. Remove the DC Power Cable, Microphone, and Antenna from the transceiver. Referring to Figure 1, remove the four screws from the side of the transceiver (two screws for each side), along with four screws affixing the bottom case;...
  • Page 20 ALE-1 Automatic Link Establishment Unit Installation Note...

  • Page 21: Ce77 Pc Programming Software

    This field sets the Default Receive Frequency of the er. With the CE77 PC Programming Software, you VFO. can quickly and easily program the Vertex Standard To enter the Receive Frequency, double click the left VX-1700 operating channels and configuration from mouse button on this column, then enter the desired your personal computer.
  • Page 22 CE77 PC Programming Software MODE SHIFT This column selects the Operating Mode. This column may used to move a spurious response To select the Operating Mode, double click the left “Birdie” from the CPU clock away from the operat- mouse button on this column to invoke a pop-up ing frequency, should it cause interference.
  • Page 23 CE77 PC Programming Software Main Programming Screen (Memory Screen) This column is used for entry of the six character CHN (CHANNEL) Alpha/Numeric “Tag” used to identify the channel. This number is used to identify the memory chan- To enter the Alpha/Numeric “Tag,” double click the nel.
  • Page 24 CE77 PC Programming Software RECEIVE FREQUENCY set Frequency from the keyboard, then press the This column is used for entry of the Receive Fre- [ENTER] key to accept the new frequency. quency. If an incorrect entry is made, the entry will be round- To enter the Receive Frequency, double click the left ed off to the nearest valid frequency automatically.

  • Page 25: File Menu

    CE77 PC Programming Software SAVE AS File Menu Save the programming session to the disk with the new name. Opens a new file. Click the left mouse button on the “Save As” pa- Click the left mouse button on the “New” parame- rameter in the File menu, a pop-up window appears ter in the File menu;...

  • Page 26: Edit Menu

    CE77 PC Programming Software Edit Menu View Menu COPY TOOL BAR Use this command to copy selected data onto the The toolbar is displayed across the top of the appli- clipboard. This command is unavailable if there is cation window, below the menu bar. The toolbar no data currently selected.
  • Page 27 CE77 PC Programming Software CW QSK Common Menu This parameter sets the delay time between the A1A (CW) FUNCTION PARAMETERS instant when the telegraph key is closed (key This parameter programs the various configuration down) and the moment the actual carrier enve- items of the A1A (CW) mode.
  • Page 28 CE77 PC Programming Software HARDWARE PARAMETERS 4 - 30 MHz RF POWER Put a check mark into the check box to enable ad- This parameter programs the TX output power justment of its parameter from the transceiver’s set on the 4 - 30 MHz band for each power setting (“menu”) mode.
  • Page 29 CE77 PC Programming Software KEY FUNCTION PARAMETERS PU/D SET This parameter sets the configurations for the key- This parameter programs the Programmable pad and button functions of the radio. Function Button feature which is located between Put a check mark into the check box to enable ad- the CH and VOL knobs.
  • Page 30 CE77 PC Programming Software MARKETING PARAMETERS MISCELLANEOUS PARAMETERS This parameter indicates the Market Application This parameter programs the miscellaneous config- Number and Serial Number of the radio. uration options of the radio. The available parameters are Market Applications Put a check mark into the check box to enable ad- and Serial Number.
  • Page 31 CE77 PC Programming Software BEEP TONE SCAN RESUME This parameter sets the Beep Tone (frequency). This parameter selects the Scan Resume Mode. The available selections are “LOW,” “NORMAL,” The available selections are “Carrier” and “Tim- and “HIGH.” er.” BEEP AF SET STANDBY BEEP This parameter defines whether the Beep volume This parameter toggles the Standby Beep feature...
  • Page 32 CE77 PC Programming Software SYSTEM PARAMETERS CLARIFIER BACKUP TYPE This parameter programs the various system con- This parameter determines the Clarifier offset fre- figurations of the radio. quency when the memory channel is recalled. Put a check mark into the check box to enable ad- The available selections are “PRESET,”...
  • Page 33 CE77 PC Programming Software MIC GAIN TUNING This parameter programs the Microphone Input This parameter programs the Automatic Anten- Sensitivity. na Tuner function. The available values for the Microphone Gain are The available selections are: OFF: Disables the automatic tuning “LOW,”...
  • Page 34 CE77 PC Programming Software DW CH SEL OPTION PARAMETERS This parameter defines whether the “DW CH This parameter programs the configurations of op- SEL” selection shall be “Enabled” or “Disabled” tional modules for the radio. from the transceiver’s set (“menu”) mode. These include the Encryption Unit and the Option Board.
  • Page 35 CE77 PC Programming Software STUN SYSTEM Selcall Menu This parameter determines whether the radio is SELCALL PARAMETERS able to receive a Stun System command or trans- This parameter programs the various Selcall config- mit a Stun System acknowledge command. urations of the radio. The available selections are “RX,”...
  • Page 36 CE77 PC Programming Software GPS POSITION REQUEST RADIO ID This parameter determines whether the radio is This parameter programs the transceiver’s Alpha/ able to receive or transmit a GPS position request. Numeric self-identification for the KILL and The available selections are “RX,” “TX,” STUN systems.
  • Page 37 CE77 PC Programming Software ALL CALL TEL CALL This parameter determines whether the “All This parameter determines whether the radio is Call” function of the Selcall feature shall be “En- able to receive or transmit a Tel Call. abled” or “Disabled”. The available selections are “RX,”...
  • Page 38 CE77 PC Programming Software TX ID PARAMETER This parameter programs the Selcall TX ID to be called. To program this parameter, enter the TX ID (4 dig- its) into the “TX ID” column, then set the desired effective channel range (i.e. 1-001, 1-050, 2-051, etc.) for the TX ID into the “FROM”...
  • Page 39 CE77 PC Programming Software LINK TOT ALE Menu This parameter define whether the Link TOT fea- ALE COMMON PARAMETERS ture shall be “Enabled (ON)” or “Disabled (OFF).” This parameter programs the various configurations When this parameter is set to “ON,” the link to for the ALE (Automatic Link Establishment) system the other radio will be automatically disconnect- of the radio.
  • Page 40 CE77 PC Programming Software NET NUMBER AMD MESSAGE PARAMETERS Put a check mark into the check box to enable This parameter programs the Alpha/Numeric mes- adjustment of its parameter from the transceiv- sages in accordance with the AMD definition. er’s set (“menu”) mode. To enter the Alpha/Numeric message, double click the left mouse button on the desired column, type the characters of the desired Alpha/Numeric mes-...
  • Page 41 CE77 PC Programming Software ALE MISCELLANEOUS PARAMETERS ALL CALL SET This parameter programs the various configurations This parameter determines whether the ALE is for the ALE (Automatic Link Establishment) system able to receive or transmit an All Call feature. of the radio. The available selections are “RX,”...
  • Page 42 CE77 PC Programming Software SILENT MODE AUTO DIAL PARAMETER This parameter defines whether the Silent mode This parameter programs the address and message shall be “Enabled (SILENT)” or “Disabled (NOR- for the ALE Call. MAL).” To enter the address, double click the left mouse When this parameter is set to “Enabled (SI- button on the desired “Address”...
  • Page 43 CE77 PC Programming Software NET MEMBER ADDRESS PARAMETER This parameter defines the network member address to be called. To enter the network nember address, select the net- work from the pull-down list, then double click the left mouse button on the desired bank to invoke a pop-up window, select the desired address, then click the [OK] button to accept the address.
  • Page 44 CE77 PC Programming Software Channel Menu Radio Menu CHANNEL ALLOCATION PARAMETER UPLOAD PARAMETER The VX-1700 is capable of allocating up to 200 chan- Reads the configuration data from the radio to the nels into 5 banks. computer. Existing data on the screen will be over- By default, Bank-1 is filled with all memories (200 written with data from the radio, and will be lost channels);...
  • Page 45 CE77 PC Programming Software DOWNLOAD PARAMETER REVIVE PARAMETER Writes the configuration data from the computer to This parameter returns the radio to the normal mode the radio. Data will be verified for integrity by the from the STUN mode. program before downloading is initiated. Turn the stunned radio on and wait 2 seconds, then NOTE: Make sure to select the correct communica- click the [Revive] button to return the radio to the...
  • Page 46 CE77 PC Programming Software Programming Example 1 Selcall Feature Basic Setup 1. Assign the “SELCALL” function into the “Pro- grammable Function key 1 (P1 SET)” and the “CALL” function to the “Programmable Function key 2 (P2 SET)” from the “KEY FUNCTION” pa- rameter in the “Common”...
  • Page 47 CE77 PC Programming Software Programming Example 2 ALE Feature Basic Setup 1. Set the “Optional Board” parameter which is lo- cated in the “Option” folder in the “Common” menu to the “ALE Unit” to activate the optional ALE-1 Unit. 2. Set the “ALE” parameter in the “ALE Common” folder in the “ALE”...
  • Page 48 CE77 PC Programming Software Programming Example 3 Programming Example 5 Kill Command Setup Revive Command Setup Enter the Kill Command (CILLIK) and Radio ID Enter the Revive Command (SVIVER) and Radio (ex. TEST6111) into the “Message” parameter on ID (ex. TEST6111) into the “Message” parameter the “Selcall”...

  • Page 49: Main Unit

    MAIN Unit Circuit Diagram...
  • Page 50 MAIN Unit Note...
  • Page 51 MAIN Unit Parts Layout (Side A) HD64F2134 AK4528VF (Q1018) (Q1071) KIA7808API TDA2003H BA05FP TC7S04FU (E5) TC7ST08FU UPD77115GK (Q1007) (Q1055) (Q1012) (Q1059, 1062) (Q1080) (Q1035) 2SA1365 2SC2714 (QY) 2SC2954 (QK) (Q1048) (Q1016, 1021, 1023, (Q1001, 1029) 1026, 1027, 1063, 2SA1602A (MF) 2SC3357 (RK) 1064, 1070, 1074, (Q1010, 1046)
  • Page 52 MAIN Unit Parts Layout (Side B)

  • Page 53: Parts List

    MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR PCB with Components CS1853002 Printed Circuit Board AC051H000 FR010270F C 1002 CHIP CAP. 0.01uF GRM39B103K25PT K22144803 C 1003 CHIP CAP. 0.01uF GRM39B103K25PT K22144803 C 1008 CHIP CAP.
  • Page 54 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 1078 CHIP TA.CAP. TESVA1C105M1-8R K78120009 C 1079 CHIP CAP. 0.01uF GRM39B103K25PT K22144803 C 1080 CHIP CAP. 0.022uF GRM39B223K25PT K22144807 C 1081 CHIP CAP. 0.022uF GRM39B223K25PT K22144807...
  • Page 55 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 1138 CHIP CAP. 18pF K22174217 C 1139 CHIP CAP. 12pF GRM1882C1H120JA01D K22174213 C 1140 CHIP CAP. 0.5pF GRM1884C1HR50CZ01D K22174201 C 1141 CHIP CAP. 0.022uF GRM39B223K25PT K22144807...
  • Page 56 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 1199 CHIP CAP. 0.022uF GRM39B223K25PT K22144807 C 1200 CHIP CAP. 0.022uF GRM39B223K25PT K22144807 C 1201 CHIP CAP. 10pF GRM1882C1H100JA01D K22174211 C 1202 CHIP CAP. 0.022uF GRM39B223K25PT K22144807...
  • Page 57 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 1261 CHIP CAP. 0.1uF GRM188B11C104KA01D K22124805 C 1262 CHIP TA.CAP. 10uF TEMSVA1A106M-8R K78100028 C 1263 CHIP CAP. 0.1uF GRM188B11C104KA01D K22124805 C 1264 CHIP TA.CAP. 3.3uF TESVB21C335M8R K78120010...
  • Page 58 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 1328 CHIP CAP. 390pF GRM1882C1H391JA01D K22174255 C 1329 CHIP CAP. 430pF GRM1882C1H431JA01D K22174256 C 1330 CHIP CAP. 430pF GRM1882C1H431JA01D K22174256 C 1331 CHIP CAP. GRM1882C1H5R0CZ01D K22174206 C 1332 CHIP TA.CAP.
  • Page 59 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 1391 CHIP CAP. 39pF GRM1882C1H390JA01D K22174225 C 1392 CHIP CAP. 0.01uF GRM39B103K25PT K22144803 C 1393 CHIP CAP. 0.01uF GRM39B103K25PT K22144803 C 1394 CHIP CAP. 0.01uF GRM39B103K25PT K22144803...
  • Page 60 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VERS. LOT. SIDE LAY ADR C 1452 CHIP TA.CAP. 3.3uF TESVB21C335M8R K78120010 C 1453 CHIP CAP. 0.0039uF GRM188B11H392KA01D K22174830 C 1454 CHIP CAP. 0.0033uF GRM188B11H332KA01D K22174831 C 1455 CHIP CAP. 0.022uF GRM39B223K25PT K22144807...
  • Page 61 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR D 1049 DIODE HVU359TRF G2070452 D 1050 DIODE HVU359TRF G2070452 D 1051 DIODE HVU359TRF G2070452 D 1052 DIODE HVU359TRF G2070452 D 1053 DIODE HVU359TRF G2070452 D 1054 DIODE...
  • Page 62 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR L 1029 CHIP COIL C2520C-1R0G L1691309 L 1030 CHIP COIL 68uH LQH32MN680K23L L1690097 L 1031 CHIP COIL 68uH LQH32MN680K23L L1690097 L 1032 CHIP COIL 39uH LQH32MN390K23L L1690094...
  • Page 63 Q 1064 TRANSISTOR 2SC2714YTE85R G3327147Y Q 1065 TRANSISTOR PDTC144EE G3070244 Q 1066 FET 2SK302Y TE85R G3803027Y Q 1068 TRANSISTOR PDTC144EE G3070244 Q 1069 TRANSISTOR PDTC144EE G3070244 Q 1070 TRANSISTOR 2SC2714YTE85R G3327147Y Q 1071 IC AK4528VF E2 G1093829 : Please contact VERTEX STANDARD...
  • Page 64 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR Q 1072 FET 2SK210GR TE85R G3802107G Q 1073 FET 2SK210GR TE85R G3802107G Q 1074 TRANSISTOR 2SC2714YTE85R G3327147Y Q 1075 TRANSISTOR 2SC2714YTE85R G3327147Y Q 1076 TRANSISTOR 2SD2211 T100 QR G3422117Q Q 1078 IC...
  • Page 65 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 1042 CHIP RES. 3.3k 1/16W 5% RMC1/16 332JATP J24185332 R 1043 CHIP RES. 3.3k 1/16W 5% RMC1/16 332JATP J24185332 R 1044 CHIP RES. 1/4W RMC1/4 680JATP J24245680...
  • Page 66 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 1102 CHIP RES. 4.7k 1/16W 5% RMC1/16 472JATP J24185472 R 1103 CHIP RES. 1/16W 5% RMC1/16 560JATP J24185560 R 1104 CHIP RES. 1/16W 5% RMC1/16 561JATP J24185561...
  • Page 67 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 1162 CHIP RES. 1/16W 5% RMC1/16 473JATP J24185473 R 1163 CHIP RES. 1/16W 5% RMC1/16 473JATP J24185473 R 1164 CHIP RES. 1/16W 5% RMC1/16 473JATP J24185473 R 1165 CHIP RES.
  • Page 68 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 1226 CHIP RES. 1/16W 5% RMC1/16 333JATP J24185333 R 1227 CHIP RES. 1/16W 5% RMC1/16 333JATP J24185333 R 1229 CHIP RES. 1/16W 5% RMC1/16 471JATP J24185471 R 1230 CHIP RES.
  • Page 69 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 1299 CHIP RES. 1/16W 5% RMC1/16 103JATP J24185103 R 1300 CHIP RES. 1/16W 5% RMC1/16 103JATP J24185103 R 1301 CHIP RES. 1/16W 5% RMC1/16 102JATP J24185102 R 1302 CHIP RES.
  • Page 70 MAIN Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 1365 CHIP RES. 1/16W 5% RMC1/16 471JATP J24185471 R 1366 CHIP RES. 1/16W 5% RMC1/16 471JATP J24185471 R 1367 CHIP RES. 1/16W 5% RMC1/16 102JATP J24185102 R 1368 CHIP RES.

  • Page 71: Pa Unit

    PA Unit Circuit Diagram...
  • Page 72 PA Unit Note...
  • Page 73 PA Unit Parts Layout (Side A) SD1405 2SB1143S (Q2012, 2013) (Q2002) KIA7808API LM2904PWR (Q2003) (Q2015) 2SC3420GR RD06HHF1 (Q2007) (Q2001) RD16HHF1 (Q2008, 2009) DTC114TK (04) DTC124GUA (K25) (Q2006) (Q2004, 2010) DTC323TK (H02) TA75S01F (SA) (Q2011) (Q2005, 2014) DAN202K (N) (D2004)
  • Page 74 PA Unit Parts Layout (Side B)
  • Page 75 PA Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR PCB with Components CS1854001 Printed Circuit Board AC051H000 FR011850E C 2001 CHIP CAP. 0.047uF GRM39B473K16PT K22124804 C 2002 CHIP CAP. 470pF GRM188B11H471KA01D K22174805 C 2003 CHIP CAP.
  • Page 76 PA Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 2084 CHIP CAP. 0.001uF 500V CF43CH102J500AT K22277222 C 2085 CHIP CAP. 820pF 500V CF43CH821J500AT K22277220 C 2086 CHIP CAP. 560pF 500V CF43CH561J500AT K22277216 C 2087 CHIP CAP.
  • Page 77 PA Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR C 2147 CHIP CAP. 390pF 500V CF43CH391J500AT K22277212 C 2148 CHIP CAP. 120pF 200V GRM21B2C2D121JV01L K22230229 C 2149 CHIP CAP. 120pF 200V GRM21B2C2D121JV01L K22230229 C 2150 CHIP CAP.
  • Page 78 PA Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR D 2005 DIODE 10EDB10 G2090781 D 2006 DIODE BAS316 G2070716 D 2007 DIODE BAS316 G2070716 D 2008 DIODE BAS316 G2070716 D 2009 DIODE BAS316 G2070716 D 2010 DIODE...
  • Page 79 PA Unit Parts List REF. DESCRIPTION VALUE MFR’S DESIG VXSTD P/N VERS. SIDE LAY ADR Q 2004 TRANSISTOR DTC124GUA T106 G3070184 Q 2005 IC TA75S01F TE85R G1091593 Q 2006 TRANSISTOR DTC114TK T146 G3070073 Q 2007 TRANSISTOR 2SC3420GR G3334200G Q 2008 FET RD16HHF1 G3090148 Q 2009 FET...
  • Page 80 PA Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 2050 CHIP RES. 1/16W 5% RMC1/16 103JATP J24185103 R 2051 CHIP RES. 1/2W RMC1/2 560JTE J24275560 R 2052 CHIP RES. 1/2W RMC1/2 560JTE J24275560 R 2053 CHIP RES.

  • Page 81: Panel Unit

    PANEL Unit Circuit Diagram...
  • Page 82 PANEL Unit Note...
  • Page 83 PANEL Unit Parts Layout (Side A)
  • Page 84 PANEL Unit Parts Layout (Side B) 2SC4154 (E) CPH6102 (AB) DTC143ZE (E23) LC75884W (Q3005) (Q3005) (Q3006) (Q3001)
  • Page 85 PANEL Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR PCB with Components CB2833001 Printed Circuit Board AC051H000 FR0118600 C 3001 CHIP CAP. 0.047uF GRM39B473K16PT K22124804 C 3002 CHIP CAP. 680pF GRM39CH681J25PT K22144203 C 3003 CHIP TA.CAP.
  • Page 86 PANEL Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR S 3004 TACT SWITCH SKRPABE010 N5090133 S 3005 TACT SWITCH SKRPABE010 N5090133 S 3007 TACT SWITCH SKRPABE010 N5090133 S 3008 TACT SWITCH SKRPABE010 N5090133 S 3009 TACT SWITCH SKRPABE010...

  • Page 87: Gps-Interface Unit

    GPS-INTERFACE Unit Circuit Diagram...
  • Page 88 GPS-INTERFACE Unit Parts Layout (Side A) TC7W04FU 2SC4154 (E) (Q4019) (Q4010, 4012)
  • Page 89 GPS-INTERFACE Unit Parts Layout (Side B)
  • Page 90 GPS-INTERFACE Unit Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR PCB with Components CB3183001 Printed Circuit Board AC051H000 FR011870C C 4014 CHIP CAP. 0.01uF GRM39B103K25PT K22144803 C 4016 CHIP CAP. 0.01uF GRM39B103K25PT K22144803 C 4034 CHIP CAP.

  • Page 91: Mic Unit

    MIC Unit Circuit Diagram Parts Layout Side A Side B Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR PCB with Components CB3199001 Printed Circuit Board AC051H000 FR0136100 J 6001 CONNECTOR R41-2509R P1091243 J 6002 CONNECTOR B8B-ZR-SM3-TFT P0091414...

  • Page 92: Enc Unit

    ENC Unit Circuit Diagram Parts Layout Side A Side B Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR PCB with Components CB3200001 Printed Circuit Board AC051H000 FR0136200 C 6101 CHIP CAP. 0.1uF GRM188B11C104KA01D K22124805 J 6101 CONNECTOR 52746-0890...

  • Page 93: Ale Unit (Option)

    ALE Unit (Option) Circuit Diagram...
  • Page 94 ALE Unit (Option) Parts Layout Side A Side B HD64F2134 ADM202EARU NJM2902V BR24L64F TC7W14FU BA05FP (Q4009) (Q4009) (Q4007) (Q4008) (Q4019) (Q4005) M51945BFP (Q4002) LH52256CT 2SC4047 (ZY) 2SC4154 (E) 2SD2211 (DQR) TC7S04FU (E5) MC2850 (A7) (Q4001) (Q4006) (Q4003, 4010, 4012, (Q4004) (Q4023) (D4010) 4021)
  • Page 95 ALE Unit (Option) Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR Printed Circuit Board AC051H000 FR011870B C 4001 CHIP CAP. 0.1uF GRM188B11C104KA01D K22124805 C 4002 CHIP CAP. 0.1uF GRM188B11C104KA01D K22124805 C 4003 AL.ELECTRO.CAP. 220uF MVA16VC220MF80 K48120021...
  • Page 96 R 4034 CHIP RES. 1/16W 5% RMC1/16 000JATP J24185000 R 4035 CHIP RES. 1/16W 5% RMC1/16 473JATP J24185473 R 4036 CHIP RES. 1/16W 5% RMC1/16 000JATP J24185000 R 4037 CHIP RES. 1/16W 5% RMC1/16 471JATP J24185471 : Please contact VERTEX STANDARD...
  • Page 97 ALE Unit (Option) Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 4038 CHIP RES. 1/16W 5% RMC1/16 000JATP J24185000 R 4039 CHIP RES. 1/16W 5% RMC1/16 471JATP J24185471 R 4041 CHIP RES. 1/16W 5% RMC1/16 471JATP J24185471...
  • Page 98 ALE Unit (Option) Parts List REF. DESCRIPTION VALUE TOL. MFR’S DESIG VXSTD P/N VERS. LOT. SIDE LAY ADR R 4109 CHIP RES. 1/16W 5% RMC1/16 333JATP J24185333 R 4110 CHIP RES. 1/16W 5% RMC1/16 103JATP J24185103 R 4111 CHIP RES. 1/16W 5% RMC1/16 333JATP J24185333...
  • Page 100 Copyright 2005 VERTEX STANDARD CO., LTD. All rights reserved No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD.

Table of Contents