Healthrider H55t Treadmill User Manual page 8

3. Identify the Left Upright (75), which is marked
"Left." Have a second person hold the Left
Upright near the Base (80).
See the inset drawing. Tie the wire tie in the
Left Upright (75) securely around the end of the
Upright Wire (70). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
4. Hold the Left Upright (75) against the Base (80).
Be careful not to pinch the wires. Insert a 3/8"
x 3 1/2" Screw (4) with a 3/8" Star Washer (5)
into the top hole in the Left Upright.
Insert the 3/8" x 3 1/2" Screw (4) partially
through the Left Upright (75). Next, slide a
Screw Spacer (93) onto the end of the Screw.
Then, partially tighten the Screw into the Base
(80).
Partially tighten two more 3/8" x 3 1/2" Screws
(4) with two 3/8" Star Washers (5); do not fully
tighten the Screws yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the right
side.
3
75
70
Wire Tie
4
8
70
75
Wire
Tie
80
75
93
5
Wires
80
4