Healthrider H55t Treadmill User Manual page 11

9. Insert the ground wires into the console assem-
bly as you set the console assembly on the Left
Upright (75) and the Right Upright (not shown).
Make sure that no wires are pinched.
Attach the console assembly with eight #8 x
3/4" Screws (6) (four are shown); start all eight
Screws, and then tighten them. Do not over-
tighten the Screws.
Insert the wires into the Left Upright (75).
Fully tighten the ten Screws (7, 9, and 10) (only
one side is shown).
See step 4. Fully tighten the six 3/8" x 3 1/2"
Screws (4).
10. Attach the Pulse Bar Bottom (90) to the console
assembly with six #8 x 3/4" Screws (6); start all
six Screws, and then tighten them. Do not
overtighten the Screws.
9
Ground
Wires
6
10
Console
Assembly
90
11
Console
Assembly
Wires
9
6
75
10
6
6
6
7