Table of Contents
Advertisement
2. With the help of a second person, carefully lower the
Uprights (96) as shown. Note: It may be helpful to place
your foot on one of the Wheels (94) as you tip the
Uprights. Make sure that the Extension Legs (86) re-
main in the Uprights.
Attach each Extension Leg (86) with two 1/4" x 1" Bolts
(88) and two 1/4" Star Washers (87) as shown.
3. Attach the four Base Pads (125) to the base of the
Uprights (96) with the four 1" Tek Screws (123) as
shown. Note: One replacement Base Pad may be in-
cluded. If a Base Pad becomes worn and needs to be re-
placed, use the replacement Base Pad.
4. With the help of a second person, carefully raise the
Uprights (96) to the vertical position.
Remove the two Latch Screws (109) from the left Upright
(96). Attach the Latch Assembly (110) to the left Upright
with the two Latch Screws. Be careful not to over-
tighten the Latch Screws.
2
96
86
94
3
125
123
125
4
7
86
87
88
96
123
96
110
109
87
88
125
123
125
123
Advertisement
Table of Contents
