Healthrider H400 Treadmill User Manual page 15

Follow your progress with the displays.
4
See step 5 on page 12.
Measure your heart rate if desired.
5
See step 6 on page 13.
Turn on the fan if desired.
6
See step 7 on page 13.
When you are finished exercising, remove the
7
key from the console.
See step 8 on page 13.
HOW TO USE A PULSE PROGRAM
Pulse program 9 will keep your heart rate near a target
heart rate setting that you select. Pulse program 10 will
automatically adjust the speed and incline of the tread-
mill to keep your heart rate within a preset range dur-
ing your workout.
CAUTION:
lems, or if you are over 60 years of age and
have been inactive, do not use the pulse pro-
grams. If you are taking medication regularly,
consult your physician to find whether the
medication will affect your exercise heart rate.
Follow the steps below to use a pulse program.
Put on the optional chest pulse sensor.
1
You must wear the optional chest pulse sen-
sor (see page 22) to use a pulse program.
Insert the key into the console.
2
See HOW TO TURN ON THE POWER on
page 12.
Select a pulse program.
3
To select a pulse program, press the Select
Program button repeatedly until "P9" or "P10" ap-
pears in the left display.
If pulse program 9 is selected, a graphic repre-
senting your heartbeat will appear in the matrix.
If pulse program 10 is selected, a profile of the
target heart rate settings of the program will scroll
across the matrix in the left display.
15
If you have heart prob-