Healthrider H400 Treadmill User Manual page 18

HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of a long 3.5mm to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into the LINE OUT jack on your stereo. Note: Whilst
the cable is plugged into the LINE OUT jack, do not
plug your headphones into the headphone jack on
the console.
A
Audio Cable
B. Plug one end of a long 3.5mm to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into an RCA Y-adaptor (available at electronics
stores). Next, remove the wire that is currently
plugged into the LINE OUT jack on your stereo and
plug the wire into the unused side of the Y-adaptor.
Plug the Y-adaptor into the LINE OUT jack on your
stereo. Note: Whilst the Y-adaptor is plugged into
the LINE OUT jack, do not plug your headphones
into the headphone jack on the console.
B
Audio
Cable
Wire removed from
LINE OUT jack
CD
VCR
Amp
LINE OUT
LINE OUT
CD
VCR
Amp
LINE OUT
LINE OUT
A
CD
VCR
A
Amp
LINE OUT
CD
VCR
Amp
LINE OUT
B
RCA
Y-adaptor
B
HOW TO CONNECT YOUR COMPUTER
A. Plug one end of a long 3.5mm to 3.5mm stereo
audio cable (available at electronics stores) into the
input jack on the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
Note: Whilst the cable is plugged into the LINE OUT
jack, do not plug your headphones into the head-
phone jack on the console.
A
18
LINE OUT
Audio Cable
A