Healthrider H125t Treadmill User Manual page 9

6. Identify the Left and Right Handrails (81, 82).
Attach the Handrails to the Pulse Bar Bottom
(87) with four 3/8" x 3/4" Screws (9). Start all
four Screws, and then tighten them.
7. Hold the Pulse Bar Top (86) near the Pulse Bar
Bottom (87). Insert the pulse wire from the Pulse
Bar Top into the Left Handrail (81) and pull it out
of the large hole in the Pulse Bar Bottom.
Attach the Pulse Bar Top (86) to the Pulse Bar
Bottom (87) with seven #8 x 1/2" Screws (1). Be
careful not to pinch the pulse wire. Start all
seven Screws, and then tighten them.
8. Hold the pulse bar assembly near the Left and
Right Uprights (88, 89). Insert the pulse wire on
the pulse bar assembly through the rectangular
hole in the top of the Left Upright and pull it out
of the front of the Left Upright.
Attach the pulse bar assembly to the Uprights (88,
89) with four 3/8" x 4 1/2" Screws (5) and four
3/8" Star Washers (13); do not fully tighten the
Screws yet.
Remove the wire tie from the Upright Wire (77).
6
87
9
81
7
86
1
1
81
Pulse
Wire
1
8
Pulse Bar
Assembly
13
Wire
5
89
9
1
1
87
Pulse
Wire
77
13
Tie
5
88
9
82