Healthrider H125t Treadmill User Manual page 8

4. Hold the Left Upright (88) against the Base (91).
Be careful not to pinch the Upright Wire (77)
or the ground wire (A). Insert two 3/8" x 2 3/4"
Screws (7) and two 3/8" x 1 1/4" Screws (8) with
two 3/8" Star Washers (13) into the Left Upright.
Partially tighten the 3/8" x 2 3/4" Screws (7) and
the 3/8" x 1 1/4" Screws (8) until the heads of the
Screws touch the Left Upright (88); do not fully
tighten the Screws yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the right
side.
5. Identify the Left and Right Base Covers (83, 84).
Slide the Left Base Cover onto the Left Upright
(88). Slide the Right Base Cover onto the Right
Upright (89). Do not press the Base Covers
into place yet.
4
7
13
8
77, A
13
8
5
88
83
8
88
91
89
84