Healthrider H125t Treadmill User Manual page 12

14. Raise the Frame (57) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (58) so that the large
barrel and the latch knob are oriented as shown.
Attach the lower end of the Storage Latch (58) to
the Base (91) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (12).
Attach the upper end of the Storage Latch (58)
to the bracket on the Frame (57) with a 3/8" x 1
3/4" Bolt (6) and a 3/8" Nut (12).
15. Attach the Left and Right Rear Feet (41, 61)
to the Frame (57) as shown with four #8 x 1/2"
Screws (1).
Lower the Frame (57) (see HOW TO LOWER
THE TREADMILL FOR USE on page 22).
16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 24 and 25).
14
57
12
Latch
Knob
Large
Barrel
91
15
41
1
12
6
58
12
3
61
57
1