Indications And Displays - Sennheiser SK 500 G2 Instructions For Use Manual

Indications and displays

LC display panel
Alphanumeric display
"B.CH" – appears when the channel bank and
the channel number are displayed
"MHz" – appears when the frequency is displayed
4-step battery status display
Lock mode icon
(lock mode is activated)
"PILOT" display
(pilot tone transmission is activated)
"MUTE" display
(audio input is muted)
7-step level display for audio signal "AF"
Operation and battery status indication
The red LED (LOW BAT/ON)
current operating state of the transmitter:
Red LED lit up:
Red LED flashing:
In addition, the 4-step battery status display
display panel provides information on the remaining
battery/BA 2015 accupack capacity:
3 segments:
2 segments:
1 segment:
Battery icon flashing:
8
provides information on the
The transmitter is switched on and
the capacity of the batteries/
BA 2015 accupack is sufficient.
The batteries are/the BA 2015
accupack is going flat (LOW BAT)!
capacity approx. 100 %
capacity approx. 70 %
capacity approx. 30 %
LOW BAT
on the