The Operating Menu; The Buttons; Overview Of Menus - Sennheiser EM 550 G2 Instructions For Use Manual

The operating menu

The operating menu is the same for both receivers of the EM 550 G2 and can be used almost intuitively. To ensure
that adjustments to the settings can be made quickly and "without looking", the necessary operating steps for the
twin receiver and the ew 500 G2 transmitters are similar.

The buttons

Buttons Mode
ON Standard display
Operating menu
Setting mode
SET Standard display
Operating menu
Setting mode
/ Standard display
Operating menu
Setting mode

Overview of menus

Display Function of the menu
Bank Switching between channel banks
Channel Switching between the channels in a channel bank
Tune Setting a receiving frequency for the channel bank "U" (user bank)
Scan Scanning the channel banks for free channels
AF Out Adjusting the audio output level
Squelch Adjusting the squelch threshold
Soundcheck Doing the soundcheck
Display Selecting the standard display
Name Entering a name
Reset Loading the factory-preset default settings
Pilot Activating/deactivating the pilot tone evaluation
Lock Activating/deactivating the lock mode
Equalizer Changing the frequency response of the audio signal
LCD Contr Adjusting the contrast of the graphic display
Exit Exiting the operating menu and returning to the standard display
To...
switch the receiver on and off
cancel the entry and return to the standard display
cancel the entry and return to the standard display
get into the operating menu
get into the setting mode of the selected menu
store the settings and return to the top menu level
without function
change to the previous menu ( ) or change to the next menu ( )
adjust the setting of the selected menu:
option ( / )
15