Sennheiser EM 550 G2 Instructions For Use Manual page 48

Guide the BNC cable with the BNC connector
rack mount "ear".
Hook the two rack mount "ears"
Secure the rack mount "ears" to the twin receiver using two of the
supplied recessed head screws (M 3x6) respectively.
Screw the two BNC sockets
supplied plain washers and nuts.
Screw the two antenna holders
Connect the two BNC connectors
(ANT I) at the rear of the twin receiver.
Slide the twin receiver into the 19" rack.
Secure the rack mount "ears" to the rack.
Connect the telescopic antennas
Pull the telescopic antennas out and align them upwards in a V-shape.
Note:
Use remote antennas (available as accessories) when the receiver
position is not the best antenna position for optimum reception.
through the hole
to the rear panel of the twin receiver.
to the antenna holders
to the handles of the twin receiver.
to the BNC sockets (ANT II) and
to the BNC sockets .
on the
using the
13