Fluke 360 Technical Data

Fluke 360
AC Leakage Current Clamp Meter
The Fluke 360, a rugged and accurate
solution for leakage current measurement
Ideally designed for non-invasive checks of insulation
condition, the Fluke 360 allows you to perform tests without
powering down the installation or disconnecting equipment -
saving you time, without compromising on quality or safety.
The unique jaw design of the Fluke 360 eliminates the
influence of adjacent current conductors, and minimizes the
effects of external magnetic fields, even at low currents.
This allows you to perform accurate and reliable tests in
today's crowded electrical environments. The tough and
high-quality clamp design of the Fluke 360 guarantees high
stability for long-term repeatability.
•
Measurement of leakage current with 3 mA range and 1 µA of
resolution, for accurate monitoring of insulation erosion
•
Broad range of measurement, from 1 µA up to 60 A, for all
installation needs
•
Advanced shielding to ensure accurate results when measuring near
other conductors
•
The high durability clamp construction can withstand over 50,000
operations - added ruggedness that extends the life of your clamp.
•
Easy-to-carry, pocket-sized clamp with wide 40 mm (1.5 in) jaw size
•
Handy "Display-Hold" button for capturing readings in hard-
to-reach places
•
Auto power-off, with warning buzzer, saves battery life
•
Conformance to IEC1010 and EMC standard for confident
measurements
•
Meets all of the applications and performance classes in safety
standard VDE0404-4 and VDE0702 for leakage current and
differential current measurement of electrical appliances
Technical Data