Power; Printer - Gateway SZSL95IN0XXXXXXXX Reference Manual

Power

Your computer will not turn on
•
•
•

Printer

The printer will not turn on
•
The printer is on but will not print
•
•
90
CHAPTER 5: Troubleshooting
Make sure that the power module is connected to an
AC power source and to your computer, and that your
computer is turned on.
If your computer is plugged into a surge protector, make
sure that the surge protector is connected securely to a
power outlet, turned on, and working correctly. To test
the outlet, plug a working device, such as a lamp, into
the outlet and turn it on.
Make sure that the power/data cable is free from cuts
or damage. Replace any damaged cables.
Make sure that the power cable is plugged into an
AC power source.
If the printer you want to print to is not the default
printer, make sure that you have selected it in the printer
setup.
To set a default printer:
1
Click (Start), then click Control Panel. The
Control Panel window opens.
2
Click Hardware and Sound, then click the Change
Default Printer option under the Printers category.
The Printer window opens.
3
Right-click the printer you want to be the default
printer, then click Set as Default Printer.
Reinstall the printer driver. See the guide that came with
your printer for instructions on installing the printer
driver.