Gateway SZSL95IN0XXXXXXXX Reference Manual page 15

Component
Power/data cable
Slide-out support
stand
Memory card
reader
IEEE 1394 port
USB ports
Headphone jack
Microphone jack
DVD-RW drive
Power button
www.gateway.com
Description
Connects your computer to the power module. This cable
must be connected before you connect the module to
AC power. For more information, see
on page 15.
Supports your computer in an upright position and helps
maintain the viewing angle. As you push the top of the
screen back or pull it forward, this support stand
automatically adjusts to maintain that angle. For more
information on adjusting the viewing angle, see
eye strain" on page
Insert a memory card from a digital camera, MP3 player,
PDA, cellular telephone, or other device into the memory
card reader. For a complete list of supported memory cards,
see "Using the memory card reader" on page
Plug IEEE 1394 (also known as Firewire
digital camcorder) into this 6-pin IEEE 1394 port. For more
information, see "Installing a printer, scanner, or other
device" on page 41.
Plug USB (Universal Serial Bus) devices (such as a USB
printer, scanner, camera, keyboard, or mouse) into these
ports. For more information, see
scanner, or other device" on page
Plug powered, analog front speakers, an external amplifier,
or headphones into this jack.
Plug a microphone into this jack.
Use this DVD-RW drive to listen to audio CDs, install games
and programs, watch DVDs, and write large files onto
recordable discs.
Press this button to turn the power on or off. You can also
configure the power button to operate in Standby/Resume
mode or Hibernate mode.
"Connecting power"
12.
™
"Installing a printer,
41.
"Reducing
32.
) devices (such as a
9