Replacing An Optical Disc Drive - Gateway Profile 6 Reference Manual

4
5
6
7
8
9

Replacing an optical disc drive

To add replace an optical drive:
1
42
CHAPTER 4: Upgrading Your Computer
Slide the diskette drive out (toward you) until it stops,
then unplug the cables from the drive.
Return your computer to its upright position, then slide
the diskette drive out the front of the computer.
Slide the new drive into the computer from the front
until the front of the drive is flush with the front of the
computer, then slide the drive release lever forward
(away from you) to lock the drive into place.
Lay the computer face-down, then reconnect the cables
to the drive.
Replace the power supply by following the instructions
in "Replacing the power supply" on page
Replace the back panel by following the instructions in
"Replacing the back panel" on page
Remove the back panel by following the instructions in
"Opening the case" on page
40.
36.
35.