Gateway Profile 6 Reference Manual page 45

www.gateway.com
4
If you are removing a DIMM from the memory module
bank, gently pull the plastic tabs away from the sides
of the memory module and remove it.
- OR -
If you are adding a DIMM to an empty memory module
bank, gently pull the plastic tabs away from the sides
of the memory module bank.
5
Align the notches on the new DIMM with the notches
on the memory module bank and press the module
firmly into the bank until the module clicks into place.
The tabs on the sides of the memory module should
secure the memory module automatically.
6
Replace the processor fan by following the instructions
in "Replacing the processor fan" on page
7
Replace the back panel by following the instructions in
"Replacing the back panel" on page
8
Return your computer to its upright position.
9
Reconnect the cables and the power cord.
10
Turn on your computer. Windows starts and the
Windows desktop appears.
11
Click (Start), right-click Computer, then click
Properties. The amount of memory in your computer
is displayed.
37.
36.
39