Gateway E-4650 System Manual page 13

Component
Power connector
Voltage selector switch
Mouse port
Keyboard port
USB 1.1 ports
Serial port
Parallel port
Network jack
USB 2.0 ports
Analog monitor port
Digital monitor port
TV out port
Icon Description
Plug the power cable into this connector.
Before turning on the computer, make sure that the switch
is in the proper position for the correct power available.
In the United States, the utility power is supplied at a
nominal 115 volts at 60 Hz. The power supply is always
set to this when the computer is operating in the United
States. In other areas of the world, such as Europe, the
utility power is supplied at 230 volts at 50 Hz. If the
computer is operating in an environment such as this, the
voltage selector switch needs to be moved to 230.
Plug a Personal System/2
Plug a PS/2 keyboard into this port.
Plug USB (Universal Serial Bus) devices (such as a USB
keyboard, scanner, or camera) into these ports.
Legacy support for USB keyboards and mice require that
they be plugged into a USB 1.1 port. Plug USB keyboards
or mice into the USB 1.1 ports.
Plug a serial device (such as a digital camera) into this
port.
Plug a parallel device (such as a printer) into this port.
Plug an Ethernet 10/100 network cable into this jack.
Plug USB (Universal Serial Bus) devices (such as a USB
keyboard, scanner, or camera) into these ports.
Legacy support for USB keyboards and mice require that
they be plugged into a USB 1.1 port. Plug USB keyboards
or mice into the USB 1.1 ports located on the back of the
computer.
Plug an external analog monitor into this port.
Plug an external digital monitor into this port.
Plug a television into this port.
®
(PS/2) mouse into this port.
Gateway Mid-Tower back
5