Additional Remotes; Remote Start Features; Disabling Remote Start; Remote And System Operations - Viper 4108V Owner's Manual

Additional Remotes

This device does not support end user programming. To add a new
remote, please consult your local 12-volt retailer to have one pro-
grammed for you.

Remote Start Features

Refer to the Quick Reference Guide for more information on
remote start features that are specific to each vehicle.

Disabling Remote Start

Remote start can be disabled by moving the Toggle Switch to the Off
position. If remote start is attempted while Off, the engine will not start.
Move the switch back to the On position to resume normal operation.
Note Consult your local 12-volt retailer for the location of Toggle
switch.

Remote and System Operations

These Remote and System Operations are only applicable to Re-
sponder LE 2-way remote control.

Out of Range

Each time a command is performed the Responder LE will expect a
command confirmation from the system. If a command confirmation
is not received the
plays as an alert.
6
and transmit LEDs flash and a long fault tone
© 2012 Directed. All rights reserved.