Remote Start; Remote Features - Viper 4108V Owner's Manual

Remote Start

Press and release
Activates (or if On, deactivates) the remote starter. The engine and
parking lights turn On and the Remote start LED and On tones play
or the engine and parking lights turn Off and the Remote start LED
and Off tones play to confirm
predetermined based on vehicle application. The remote starter will
shut down when the preset runtime times out or when any shutdown
zone becomes active.
Note
Refer to the Quick Reference Guide for more information.
AUX/Trunk
Press and hold AUX
The Trunk opens (if connected) when this button is pressed for 5 sec-
onds. The Aux LED and tones play to confirm

Remote Features

Press and hold the
1.
long beep and the transmit LED turns on.
Press the
2.
transmit LED flashes and 2 beeps indicate the remote features
menu is accessed. Press the buttons indicated in the tables
below to set the feature option.
Responder LE 2-way remote control
The Ghost LEDs next to the button indicate the feature settings.
1-way remote control: The 1-way remote will flash the transmit
LED to indicate the setting.
1 Confirmation LEDs, beeps and tones are only applicable to the Responder LE 2-way
remote control.
4
. The runtime on the remote starter is
1
button for 8 seconds, the remote emits one
button to access the remote operation features, 2
.
1
© 2012 Directed. All rights reserved.
1 ,