Chapter 10 WAN
Figure 52 Network > WAN > Advanced
The following table describes the labels in this screen.
Table 29 Network > WAN > Advanced
LABEL
Multicast Setup
Multicast
Auto-Subnet Configuration
Enable Auto-IP-
Change mode
Apply
Cancel
92
DESCRIPTION
Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the
WAN to the LAN.
Select None to disable this feature. This may cause incoming traffic to be dropped or
sent to all connected network devices.
Select this option to have the NBG6716 change its LAN IP address to 10.0.0.1 or
192.168.1.1 accordingly when the NBG6716 gets a dynamic WAN IP address in the
same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1.
The NAT, DHCP server and firewall functions on the NBG6716 are still available in this
mode.
Click Apply to save your changes back to the NBG6716.
Click Cancel to begin configuring this screen afresh.
NBG6716 User's Guide