ZyXEL Communications NBG6716 User Manual page 105

Figure 60 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2
The following table describes the labels in this screen.
Table 35 Network > Wireless LAN 2.4G/5G > General: WPA/WPA2
LABEL
Security Mode
WPA Compatible
Group Key Update
Timer
PMK Cache Period
NBG6716 User's Guide
DESCRIPTION
Select WPA or WPA2 to enable data encryption.
This check box is available only when you select WPA2-PSK or WPA2 in the Security
Mode field.
Select the check box to have both WPA2 and WPA wireless clients be able to
communicate with the NBG6716 even when the NBG6716 is using WPA2-PSK or WPA2.
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key
management) sends a new group key out to all clients. The re-keying process is the
WPA/WPA2 equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is
also supported in WPA-PSK/WPA2-PSK mode.
This field is available only when you select WPA2.
Specify how often wireless clients have to resend usernames and passwords in order
to stay connected. Enter a time interval between 10 and 999999 minutes.
Note: If wireless client authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Chapter 11 Wireless LAN
105