ZyXEL Communications NBG6716 User Manual page 88

Chapter 10 WAN
Figure 50 Network > WAN > Internet Connection: IPoE Encapsulation
The following table describes the labels in this screen.
Table 27 Network > WAN > Internet Connection: IPoE Encapsulation
LABEL
ISP Parameters for Internet Access
Encapsulation
IP Address
Obtain an IP
Address
Automatically
Static IP Address
IP Address
Subnet Mask
Gateway IP
Address
MTU Size
DNS Server
88
DESCRIPTION
You must choose the IPoE option when the WAN port is used as a regular Ethernet.
Select this option If your ISP did not assign you a fixed IP address. This is the default
selection.
Select this option If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Static IP Address.
Enter the Subnet Mask in this field.
Enter a Gateway IP Address (if your ISP gave you one) in this field.
Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet
arrives, the NBG6716 divides it into smaller fragments.
NBG6716 User's Guide