ZyXEL Communications NBG6716 User Manual page 155

Figure 95 Management > StreamBoost Management > Bandwidth
The following table describes the labels in this screen.
Table 60 Management > StreamBoost Management > Bandwidth
LABEL
Automatic
Bandwidth
Detection
Up Limit
Down Limit
Run Bandwidth Test Click Test Bandwidth to determine the maximum bandwidth of your internet
Enable Automatic
Update
Apply
Cancel
NBG6716 User's Guide
DESCRIPTION
Select this option to control the maximum or minimum amounts of bandwidth that can
be used by traffic.
Set the total amount of bandwidth that you want to dedicate to uplink (or outgoing)
traffic. This is traffic from LAN/WLAN to WAN.
Set the total amount of bandwidth that you want to dedicate to downlink (or incoming)
traffic. This is traffic from WAN to LAN/WLAN.
connection.
StreamBoost provides a cloud-based service to learn any new type of traffic which is not
in its database and update the table in the NBG6716 for traffic detection and policies.
Select this option to have theNBG6716 automatically receives the StreamBoost table
updates. When there is a new type of traffic which is not in the NBG6716's table, the
NBG6716 will capture some packets and send them to the StreamBoost cloud for
analysis and database update.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
Chapter 19 StreamBoost Management
155