Table of Contents
Advertisement
SSID (3):
Channel
Number (4):
Associated Clients (5):Click 'Show Active Clients' button, then an "Active
MAC address
1 to 4 (6 - 9):
Security
Setting (10):
8.1.6 Setup procedure for 'Universal Repeater'
In this mode, the X650 can act as a wireless repeater; it can be a Station and
AP at the same time. It can use its Station function to connect to a Root AP and
use its AP function to service all wireless stations within its coverage.
NOTE: For Repeater Mode, this router will demodulate the received
signal, checking if this signal is noise for the operating network, then
have the signal modulated and amplified again. The output power of
this mode is the same as that of WDS and normal AP mode.
Input the SSID of your wireless router (the setting should
be the same with other wireless routers for the
convenience of roaming).
Select the channel you want to use (all the wireless
routers must use the same settings).
Wireless Client Table" will pop up. Here you can see the
status of all active wireless stations connected to the
access point.
Input the MAC address of other wireless routers.
Click to set security settings for this connection
(Please go to section '8.3 Wireless Security' for detailed
instructions).
82
Advertisement
Table of Contents
