Setup Procedure For 'Ap Bridge - Wds - ZyXEL Communications X650 User Manual

Here are descriptions of each setup item:
Band (2):
Channel
Number (3):
MAC address
1 to 4 (4 - 7):
Security
Setting (8):
8.1.5 Setup procedure for 'AP Bridge – WDS'
In this mode, you can expand the scope of network by combining up to four
other access points together while still allowing every access point to accept
wireless clients.
Select the band you want to use (all the wireless routers
must use the same settings).
Select the channel you want to use (all the wireless
routers must use the same settings).
Input the MAC address(es) of other wireless router(s).
Click to set security settings for this connection
(Please go to section '8.3 Wireless Security'
for detailed instructions).
80
1
2
3
4
5
6
7
8