Setup Procedure For 'Access Point - ZyXEL Communications X650 User Manual

5) AP Bridge-WDS: Connect the X650 with up to four WDS-capable wireless
routers to expand the scope of your network.
6) Universal Repeater: The X650 can act as Station and AP at the same time. It
can use its Station function to connect to a Root AP and use its AP function to
service all wireless stations within its coverage.
NOTE: For 'AP Bridge-Point to Point' and 'AP Bridge-Point to
Multi-Point' mode, wireless router is operated in wireless bridge
dedicated mode – this means that the X650 is only being used to
expand the scope of network and no wireless clients will be accepted.
If you want to use your wireless router to expand the scope of
network and also accept wireless clients, please select 'AP
Bridge-WDS' or 'Universal Repeater' mode.
Please select a proper operation mode you want to use from 'Mode' dropdown
menu (1), and continue on with other operation mode specific settings:
Access Point
Station-Infrastructure
AP Bridge-Point to Point
AP Bridge-Point to Multi-Point
AP Bridge-WDS
Universal Repeater
8.1.1 Setup procedure for 'Access Point':
Please select the radio band you want to use from the 'Band' dropdown menu
(2), and the following message will be displayed:
2.4GHz Access Point Settings
- Please go to section 8.1.1
- Please go to section 8.1.2
- Please go to section 8.1.3
- Please go to section 8.1.4
- Please go to section 8.1.5
- Please go to section 8.1.6
72