Connecting To A Wireless Ethernet Network In Windows 2000; Turning Your Wireless Ethernet On Or Off In Windows 2000 - Gateway 1450 User Manual

Chapter 11: Using a Wireless Ethernet Network
7
Click
8
Click
Connecting to a wireless Ethernet network in
Windows 2000
After you have set up your profiles for all the possible wireless Ethernet
networks you may want to connect to, you can select which network to access.
To connect to a wireless Ethernet network:
1
Right-click the ORiNOCO Client Manager icon
2
Click
to access.
Turning your wireless Ethernet on or off in
Windows 2000
There are times, such as when you are flying in an aircraft, when you should
turn off your wireless Ethernet network. You can also turn off wireless Ethernet
to conserve the battery charge on your notebook.
To turn wireless Ethernet on or off using the Client Manager:
1
Right-click the ORiNOCO Client Manager icon
2
Click
off wireless Ethernet.
210
to close the TCP/IP Properties dialog box.
OK
to close the Network dialog box.
OK
, then click the profile for the network you want
Configuration Profile
to turn on wireless Ethernet or
Enable Radio
www.gateway.com
on the taskbar.
on the taskbar.
to turn
Disable Radio