Connecting To A Wireless Ethernet Network - Gateway M-1412 User Manual

Configuring the TCP/IP protocol
A networking protocol is a language computers use to talk to each other. One of several available
protocols must be set up on each computer you plan to use on your network. We recommend
you use the Transmission Control Protocol/Internet Protocol (TCP/IP), which is widely accepted
and compatible for local area networks (LANs), as well as for Internet communications.
When networking is set up in Windows Vista™, TCP/IP is automatically installed as the default
protocol.
Using a DHCP server
In order to use the TCP/IP protocol on a computer with a router or access point router, the
protocol must be set to "Obtain an IP address from a DHCP server." This is typically preset when
you receive your computer.
Configuring your router
After you have named your computers and set up TCP/IP on them, you can configure your router
using your Web browser. For instructions, see your router's documentation.

Connecting to a wireless Ethernet network

same Workgroup Name. You may have already named your computer and workgroup the first time you turned on your
computer.
Connecting to your network
following keywords in the Search Help box, then press E
• Connect to an available network
• Manually add a wireless Ethernet network
• Connecting to wireless Ethernet network.
After you have named your computer and workgroup, you need to set up the network connection
on your computer.
To connect to your wireless Ethernet network:
1
52
CHAPTER 5: Networking Your Notebook
Important
Each computer on your network needs a unique Computer Name. All the computers on your network need the
Help
For more information about connecting to your network, click Start, then click Help and Support. Type the
Click Start, then click Network. The Network window opens.
.
NTER