General Controls - Pyle PLCDCS90M Owner's Manual

General Controls:

1. Power On/Off
You can turn this unit ON by pressing any button on the front panel (except the RELEASE
button, EJECT key), or inserting a disc into disc slot; you can see the WELCOME on the
LCD will display at the same time.
Press the power(PWR) button to turn power off; simultaneity, the GOOD BYEwill also
be visible on the LCD display.
2.To adjust the volume level
Press the volume UP(+) or DOWN(-) button shortly or hold to raise or lower the volume
level during playback. The both buttons are also used to adjust the settings for Bass,Treble,
Balance when you are in those audio modes.
3. To Select Playback Mode
Press the MODE button repeatedly to select the different modes as the following sequence
RADIO, TAPE, CDP, CDC mode.
4. Loudness ON/OFF
Press the LOU button to enhance bass sound when volume level is low. Press again to
cancel.
5. Audio Mode and Menu Select/adjustment
1)Audio mode select and adjustment:
Press the SEL button repeatedly to toggle cyclically through audio modes:
-> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER ->
After selecting a certain audio mode, you can adjust the setting for Bass, Treble
Balance and fader by pressing the volume UP(+) or DOWN(-) button.
Note: Adjustments to Bass and Treble will override any preset EQ( Preset Equalizer
Curves).
In each mode, the waiting time is about 5 seconds, and the waiting time is over,it returns
to the last display mode of tuner(Radio), TAPE, CDP or CDC mode.
The control mode of E.VOL is operated with following numeric display.
2) Menu mode select and adjustment:
Press the SEL button for about 2 seconds to access the MENU mode,and the LCD will
display MENU for 2 seconds, and then go to the first menu item which is EQ. Within 5
seconds, press the SEL or UP button shortly to select next menu item, or press the DN
button shortly to select the previous menu item in sequence and circulation as follows:
EQ: FLAT--- EQ: EQ OFF will be displayed by default. Press the volume UP(+) or
- VOL: (MIN)00, 01,......45, 46(MAX).
- BASS/TREB: -6, -5,...,0,...+5,+6
- BAL: 12L, 11L,...,02L, 01L,L=R,01R, 02R...11R,12R
- FAD: 12R, 11R,...,02R, 01R,R=F,01F, 02F...11F,12F
3