Replacing Gateway 450SX4 Components
Replacing the hard drive kit
Tools you need to complete this task:
Screws removed during this task:
1 chrome 2.5 × 4 mm
(hard drive kit)
To replace the hard drive kit:
1
Disconnect the AC adapter and modem and network cables and prepare
your notebook by following the instructions in "Preparing your notebook"
on page 6.
2
Disconnect your notebook from the optional port replicator by following
the instructions in "Disconnecting from the port replicator" on page 7.
3
Turn your notebook over so the bottom is facing up.
4
Remove the main and optional secondary batteries by following the
instructions in "Removing the batteries" on page 8.
24
Phillips #0 screwdriver
www.gateway.com