Table of Contents
Advertisement
Specifications
No.
Items
1.
No of needle and threads
2.
Needle
3.
Overedge width
4.
Stitch length
5.
Differential feed ratio
6.
Needle bar stroke
7.
Feed dog height
8.
Presser foot height
9.
Light
10.
Power switch
11.
Motor
12.
Sewing speed
13.
Driving system
14.
Machine size
15.
Machine weight
16.
Foot control
1. Installation of the throat plate
1.1. Checking items:
1 Throat plate
2 Setscrew
3 Feed dog
- Check that needles are laterally equidistant with respect to the throat
plate slot (A, B).
- Check that the distance between the needle center and the front
edge of the throat plate slot is 1.2 mm (C).
1.2. How to perform adjustment:
- Perform the adjustment of the needle entry by moving the throat
plate.
- Loosen the setscrews 2 of the throat plate and adjust the following:
a) The feed dog teeth are parallel to the slots in the throat plate.
b) The needles are spaced equidistantly to the slots in the throat plate (A,
B).
c) The distance between the needle center and the front edge of the
throat plate slot is 1.2 mm (C).
- Retighten the setscrews 2 .
Description
3-needles 4-threads, 2-needles 3-threads (for covering)
1-needle 2-threads (for double-chain)
130/705H #80 (#70 - #90)
5.0 mm (for covering)
1.0 - 4.0 mm
Stretching: 1 : 0.7 Shirring: 1 : 1 - 1 : 2
27 mm
Standard 1.3 mm
8 (+0/-0.6) mm
UL/CSA 15 Watt (built-in), VDE/SAA/GB 10 Watt (built-in)
2-step rocker switch
built-in, 240V, 120V, 230V, Input 90W
Up to 1,350 sti/min
Timing belt, Machine rotates in the forward (normal) direction
280 (W), 335 (D), 285 (H) mm
6.8 kg
Electronic type
– 1 –
2
1
1.2 mm
(C)
(A)
3
1.2 mm
(C)
(B)
(A)=(B)
Advertisement
Table of Contents
