Displaying Logging Facility - Cisco ASR 5x00 Home eNodeB Administration Manual

HeNB-GW Service Configuration Procedures

Displaying Logging Facility

This section shows the logging facility event logs for logging facilities enabled on HeNB-GW node.
Step 1
Verify the logging facilities configured on HeNB-GW system node by entering the following command in Exec Mode:
show logging [ active | verbose]
The output of this command provides the display of event logs for all configured logging facilities.
Cisco ASR 5x00 Home eNodeB Gateway Administration Guide ▄
Logging Facility Configuration ▀
45