Table of Contents
Advertisement
Zeta Alarm Systems.
5 . 5
P C P r o g r a m m i n g S o f t w a r e N o t e s
Some notes regarding the PC Programming software (described in Section 4):
Requires Windows 95 or later; Zeta Alarm Systems recommends using Windows 95C or
98SE.
Switch between communications ports by clicking the "COMx" text beneath the "Online/
Offline" box.
Currently does not save data to disk; later versions may add this capability. If you need to
modify the existing info in a ZNDC, read the data from the ZNDC, modify it, and write it back to
the ZNDC.
The "Debug Info" panel in the "Communications" tab may not be present in later versions; it is
intended only as a debugging aid.
Revision 1.0
ZNDC Installation and Operation Manual
Part # MAN-ZNDC-01
Page 19
Advertisement
Table of Contents
