Account Data - Zeta ZNDC Installation And Operating Manual

Zeta Alarm Systems.
4 . 2 . 2 A c c o u n t D a t a
The ZNDC offers selective reporting. In other words, you may set the ZNDC to report events to
more than one central station. In addition, you may choose which events are reported to which sta-
tion. In order to communicate with a central station, you must program the ZNDC with the:
Account Number: This must be a four-digit number (0000-9999), and will be provided by the
central station.
Primary Phone Number: This is the number of the central station. You may use up to 32 char-
acters. The number may include a "," (comma) to delay for two seconds. This is useful if, for
example, you need to route the call through a PBX system. If your phone line supports the
"call waiting" feature, you should disable it by prepending a "*70" for tone dialing, or a "1170"
for pulse dialing.
Secondary Phone Number: This is a secondary number at the same central station, and will
be used as back up in case the primary phone number is somehow disabled.
Reporting Format: Only "Contact ID" is offered.
Revision 1.0
ZNDC Installation and Operation Manual
Part # MAN-ZNDC-01 Page 15