Locations Of Surface Elements And Controls - LG LRE30955ST Owner's Manual & Cooking Manual

1_'211-1
,-,-_Power Failure) MESSAGE
The PF message will appear whenever there has been a
power interruption to the appliance. To dear the PF message
touch ON/OFF control pad to reset and be sure to reset the
clock with the correct time of day (see page 17).
I II-_ i
n:,_Hot Surface) MESSAGE:
• The HS message will appear in the display once the burner
has been turned off and the eooMop is hot to the touch.
(approximately 15o deg F)
-HS will appear during the Sdf Clean Cycle.
LOCATIONS OF SURFACE
ELEMENTS AND CONTROLS
The surface burner elements are positioned in the same
locations on the eooktop and the control panel for ease of
use.
Left Rear Element WarmingZone Right Rear Element
Left Front Element Right Front
Triple Element
:_01'1!:•The temperature settings can be increased or
decreased by o.2 increments for settting 1.o
through 3.o by using the + and - control pad. The
temperature setting can be increased or
decreased by o.5 for settings 3.o through 9.o •
-8-