S U R FAC E C O N T RO L S C O O K I N G
POWER OUTAGE MESSAGE
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
HOT SURFACE INDICATOR WILL
• Come on when the unit is hot to touch after.
• Come on during self-cleaning cycle.
LOCATIONS OF THE RADIANT SURFACE ELEMENTS AND
CONTROLS
The radiant surface elements are located on the
cooktop as below.
Single
Left Front
Element
10
Single
Left Rear
Element
The time of day will flash in the display when there
has been a power outage.
Press the Clear/Off pad. Reset the clock with the
correct time of day.
• Stay on even after the unit is turned off.
• Glow until the unit has cooled down to
approximately 150°F.
TIMER
DELAY
TIMED
BAKE BROIL
WARM
CLEAN LOCKED
Single
Dual
Right Rear
Right Front
Element
Dual Element