Setting Surface Controls - LG LRE30955ST Owner's Manual & Cooking Manual

SETTING SURFACE CONTROLS
When changing from a high heat setting to a lower heat
setting, the surface unit may stop glowing. This is normal.
To turn on a single surface unit
(Right Rear, Left Rear, Lej_ fronO
1. Touch ON/OFF for the desired
element position• The display will
flash .
(The display will disappear if not
used after 10 seconds•)
2. Touch@ once to turn on the
power level Hi or e once for Lo.
3. Use the e/_ to choose the
desired power setting.
e/@ is continuously accessible.
(Adjustable at any time while the
element is ON.)
To turn off the element after
cooking, touch ON/OFF once.
• DO NOT touch surface elements until it
has cooled down sufficiently.
-The surface elements may still be hot and burns may
Occur,
• NEVER leave food unattended at high or
medium-high setting.
- Boilovers can cause smoking and greasy spillovers
may catch on fire.
To turn on a triple surface element
(Right Front Inner, Middle, Outer)
1. Touch ON/OFF. The display will
flash .
(The display will disappear if not used
after 10 seconds•)
2. Touch SELECT for desired element
size.
! il ¸ ;Eiii :¸
Single light • Single Element (6" element)
Double hght Double Element (6 and 9
elements)
%
Triple light • Triple Element (6", 9" and 12"
elements)
3. Touch@ once to turn on the power
level Hi or _ once for Lo.
4. Use the _/_ to choose the desired
power setting, e/@ is continuously
accessible• (Adjustable at any time
while the element is ON.)
5. To turn off the element after cooking,
touch ON/OFF once.
• DO NOT touch surface elements until it
has cooled down sufficiently.
-The surface elements may still be hot and burns may
Occur•
-9-