Time Setup; Units Setup - Garmin RINO 530HCx Owner's Manual

M M
aIn enu

Time Setup

.
To access the Time Setup page:
From the Setup Menu, select Time.
• time Format—choose from 12-hour or 24-hour
time format.
• time Zone—set to one of the eight US Time
Zones, or 24 International Time Zones. Select
Other so you can enter the UTC Time Offset.
• Daylight Saving time—On or Off or Auto.

Units Setup

Used by individuals with a working knowledge of map
grids and datums.
To access the Units Setup page:
From the Setup Menu, select Units.
• Position Format—sets the coordinate system in
which a location is shown. The default format is
latitude and longitude in degrees, minutes, and
thousandths of a minute (hdddomm.mmm).
• Map Datum—sets the description for geographic
52
location for surveying, mapping, and navigation
and is not an actual map built into the unit. The
default setting is WGS 84. The unit automatically
chooses the best datum based on your chosen
format.
• Distance/Speed—sets the unit of measurement to
show your speed and distance traveled.
• elevation (Vert. Speed)—sets the unit of
measurement (Feet (ft/min), Meters (m/min), or
Meters (m/sec) to show your rate of ascent.
• Depth—select the unit of measurement (Feet,
Fathoms, or Meters).
• Pressure—sets the unit of measurement (Inches,
Millibars, or Hectopascals) to show pressure.
Rino 520HCx and 530HCx Owner's Manual