Table of Contents
Advertisement
Mounting
once you have confirmed that your machine is
running properly, you may decide to mount it to
a workbench. simply remove the adjustable feet
and mount it through the holes in the base.
the strongest mounting option is a "through
Mount" where holes are drilled all the way through
the workbench, and hex bolts, washers, and hex
nuts are used to secure the drill press to the
workbench.
Machine Base
Workbench
figure 7. example of a through mount setup.
-16-
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
another option for mounting is a "direct Mount"
where the machine is simply secured to the work-
bench with a lag screw.
Machine Base
Workbench
figure 8. example of a direct mount setup.
Whichever method you choose, it is crucial that
the workbench is perfectly flat. Mounting the lathe
to a surface that is not flat may cause the lathe
bed to warp. Make sure all four corners are sitting
firmly on the workbench and, if necessary, use
shims to level the lathe and prior to mounting.
do not overtighten the mounting fasteners as this
may crack the cast iron feet.
Models G0657/G0658 (Mfg. Since 5/13)
Lag Screw
Flat Washer
Advertisement
Table of Contents
