Table of Contents
Advertisement
Using the Audio Functions
This section provides information on the speaker audio functions.
Side Jacks
Microphone Jack
Headphone Jack
Rear Panel Jacks
Mic Out
Audio In
Microphone Extension Operation
The Microphone Jacks on the Speaker/USB HUB Option provide a convenient
way to extend the microphone input connector to your desktop.
In order to use the MIC jack on the side of the Speaker/USB HUB Option, use the
provided Microphone extender cable (pink connectors) to plug into the rear of the
Speaker/USB HUB Option (MIC OUT) and into the MIC input jack of your sound
card (if available). A microphone (that meets the requirements defined for your
sound card) can then be plugged into the MIC jack on the side of the
Speaker/USB HUB Option.
Audio Input
The Audio Input on the back of the Speaker/USB HUB Option should be
connected to the Line Output jack on the computer system sound card using the
provided cable (Lime Green connectors). The Speaker/USB HUB Option has a
built-in amplifier (Amp). If the Audio Out of computer sound card has only Speaker
Out, reduce the volume control on the computer system.
NOTE
If the Audio Out of the
Please use the Line Out function (For more information, refer to the
documentation that comes with your computer).
An external microphone can be used
instead of the preinstalled microphone.
A headphone jack that automatically
mutes the speaker volume when
headphones plugged in.
Connects to the microphone jack of the
- Pink
computer sound card.
-Lime Green
Connects to the *LINE OUT jack of the
computer sound card.
computer
supports both Speaker Out and Line Out,
A4
Advertisement
Table of Contents
