Installing The Bottom Trim - Kenmore 30" Built In Wall Oven Installation Instructions Manual

Installation Instructions
Installing the Bottom Trim
D----_ Make sure the flat side is up on the
bottom trim.
Key hole slot and wide flange at top
_-2-] Find the Key Slot on the back of the
trim.
_3-_ Match the key slot with the rivet on the
bottom of the side trim
[_ Push the trim down until it into
snaps
place.
\
Lower trim mounting rivet on bottom of side
trim.
Push trim down at both ends until it snaps into
place.
f
il _jlL CAUTION: Be sure you do not tip the oven foward during installation or you
may bend the bottom trim. The bottom trim providas an opening for cooling
air to enter the cabinet. This opening should never be blocked.
11